diff --git a/hardware/argonone-irconfig.sh b/hardware/argonone-irconfig.sh
new file mode 100644
index 0000000..f125943
--- /dev/null
+++ b/hardware/argonone-irconfig.sh
@@ -0,0 +1,324 @@
+#!/bin/bash
+
+CHECKPLATFORM="Others"
+# Check if Raspbian
+grep -q -F 'Raspbian' /etc/os-release &> /dev/null
+if [ $? -eq 0 ]
+then
+	CHECKPLATFORM="Raspbian"
+fi
+
+echo "--------------------------------"
+echo "Argon One IR Configuration Tool"
+echo "--------------------------------"
+echo "WARNING: This only supports NEC"
+echo "         protocol only."
+echo -n "Press Y to continue:"
+read -n 1 confirm
+echo
+
+if [ "$confirm" = "y" ]
+then
+	confirm="Y"
+fi
+
+if [ "$confirm" != "Y" ]
+then
+	echo "Cancelled"
+	exit
+fi
+echo "Thank you."
+
+get_number () {
+	read curnumber
+	if [ -z "$curnumber" ]
+	then
+		echo "-2"
+		return
+	elif [[ $curnumber =~ ^[+-]?[0-9]+$ ]]
+	then
+		if [ $curnumber -lt 0 ]
+		then
+			echo "-1"
+			return
+		elif [ $curnumber -gt 100 ]
+		then
+			echo "-1"
+			return
+		fi	
+		echo $curnumber
+		return
+	fi
+	echo "-1"
+	return
+}
+
+irexecrcfile=/etc/lirc/irexec.lircrc
+irexecshfile=/usr/bin/argonirexec
+irdecodefile=/usr/bin/argonirdecoder
+kodiuserdatafolder="$HOME/.kodi/userdata"
+kodilircmapfile="$kodiuserdatafolder/Lircmap.xml"
+remotemode=""
+needinstallation=0
+
+loopflag=1
+while [ $loopflag -eq 1 ]
+do
+	echo
+	echo "Select remote control to configure:"
+	echo "  1. Configure Remote ON/OFF Button"
+	if [ "$CHECKPLATFORM" = "Raspbian" ]
+	then
+		echo "  2. Configure Other Remote Buttons"
+		if [ ! -f "$irexecshfile" ]
+		then
+			echo "  3. Cancel"
+			echo -n "Enter Number (1-3):"
+
+			newmode=$( get_number )
+			if [[ $newmode -ge 1 && $newmode -le 3 ]]
+			then
+				loopflag=0
+				if [ $newmode -eq 3 ]
+				then
+					newmode=4
+				fi
+			fi
+
+		else
+			echo "  3. Uninstall Other Remote Buttons"
+			echo "  4. Cancel"
+			echo -n "Enter Number (1-4):"
+			newmode=$( get_number )
+			if [[ $newmode -ge 1 && $newmode -le 4 ]]
+			then
+				loopflag=0
+			fi
+		fi
+	else
+		echo "  2. Cancel"
+		echo -n "Enter Number (1-2):"
+
+		newmode=$( get_number )
+		if [[ $newmode -ge 1 && $newmode -le 2 ]]
+		then
+			loopflag=0
+			if [ $newmode -eq 2 ]
+			then
+				newmode=4
+			fi
+		fi
+	fi
+done
+
+
+echo
+if [ $newmode -eq 3 ]
+then
+	irtmpconfigfile=/dev/shm/argonirconfig.txt
+	sudo systemctl stop irexec.service
+	sudo systemctl disable irexec.service
+	sudo pip3 uninstall lirc -y
+	sudo apt-get -y remove lirc
+	sudo rm $irexecshfile
+	sudo rm $irdecodefile
+
+	sudo cat /boot/config.txt | grep -v 'dtoverlay=gpio-ir,gpio_pin=23' > $irtmpconfigfile
+	cat $irtmpconfigfile | sudo tee /boot/config.txt 1> /dev/null
+	sudo rm $irtmpconfigfile
+
+	echo "Uninstall Completed"
+	echo "Please reboot for changes to take effect"
+	exit
+elif [ $newmode -eq 1 ]
+then
+	loopflag=1
+	while [ $loopflag -eq 1 ]
+	do
+		echo
+		echo "Select remote control to configure:"
+		echo "  1. Use Argon Remote ON/OFF Button"
+		echo "  2. Use Custom Remote ON/OFF Button"
+		echo "  3. Cancel"
+		echo -n "Enter Number (1-3):"
+		newmode=$( get_number )
+		if [[ $newmode -ge 1 && $newmode -le 4 ]]
+		then
+			loopflag=0
+		fi
+	done
+
+	if [ $newmode -eq 3 ]
+	then
+		echo "Cancelled"
+		exit
+	elif [ $newmode -eq 1 ]
+	then
+		remotemode="resetpower"
+	elif [ $newmode -eq 2 ]
+	then
+		remotemode="power"
+	fi
+elif [ $newmode -eq 2 ]
+then
+	echo "--------------------------------"
+	echo "Argon One IR Configuration Tool"
+	echo "--------------------------------"
+	echo "WARNING: This will install LIRC"
+	echo "         and related libraries."
+	echo -n "Press Y to agree:"
+	read -n 1 confirm
+	echo
+
+	if [ "$confirm" = "y" ]
+	then
+		confirm="Y"
+	fi
+
+	if [ "$confirm" != "Y" ]
+	then
+		echo "Cancelled"
+		exit
+	fi
+	echo "Thank you."
+
+
+	needinstallation=1
+	loopflag=1
+	while [ $loopflag -eq 1 ]
+	do
+		echo
+		echo "Select remote control to configure:"
+		echo "  1. Use Argon Remote Buttons"
+		echo "  2. Use Custom Remote Buttons"
+		echo "  3. Cancel"
+		echo -n "Enter Number (1-3):"
+		newmode=$( get_number )
+		if [[ $newmode -ge 1 && $newmode -le 4 ]]
+		then
+			loopflag=0
+		fi
+	done
+
+	if [ $newmode -eq 3 ]
+	then
+		echo "Cancelled"
+		exit
+	elif [ $newmode -eq 1 ]
+	then
+		remotemode="default"
+	elif [ $newmode -eq 2 ]
+	then
+		remotemode="custom"
+	fi
+else
+	echo "Cancelled"
+	exit
+fi
+
+needrestart=0
+if [ $needinstallation -eq 1 ]
+then
+	if [ ! -f "$irexecshfile" ]
+	then
+		needrestart=1
+		sudo apt-get -y update
+		sudo apt-get -y install lirc
+
+		sudo pip3 install lirc
+
+		echo "dtoverlay=gpio-ir,gpio_pin=23" | sudo tee -a /boot/config.txt 1> /dev/null
+
+		sudo /usr/share/lirc/lirc-old2new
+
+		sudo systemctl daemon-reload
+		sudo systemctl enable irexec.service
+		sudo systemctl start irexec.service
+
+		echo "" | sudo tee $irexecrcfile 1> /dev/null
+		for keyname in UP DOWN LEFT RIGHT BACK PLAYPAUSE MENU HOME OK MUTE VOLUMEUP VOLUMEDOWN
+		do
+			echo 'begin' | sudo tee -a $irexecrcfile 1> /dev/null
+			echo '	remote=argon' | sudo tee -a $irexecrcfile 1> /dev/null
+			echo '	prog=irexec' | sudo tee -a $irexecrcfile 1> /dev/null
+			echo '	button=KEY_'$keyname | sudo tee -a $irexecrcfile 1> /dev/null
+			echo '	config='$irexecshfile' "'$keyname'"' | sudo tee -a $irexecrcfile 1> /dev/null
+			echo 'end' | sudo tee -a $irexecrcfile 1> /dev/null
+		done
+
+
+		echo "#!/bin/bash" | sudo tee $irexecshfile 1> /dev/null
+
+		echo '' | sudo tee -a $irexecshfile 1> /dev/null
+		echo 'if [ -z "$1" ]' | sudo tee -a $irexecshfile 1> /dev/null
+		echo 'then' | sudo tee -a $irexecshfile 1> /dev/null
+		echo '        exit' | sudo tee -a $irexecshfile 1> /dev/null
+		echo 'fi' | sudo tee -a $irexecshfile 1> /dev/null
+
+		echo '' | sudo tee -a $irexecshfile 1> /dev/null
+
+		echo '# Handlers for different key codes' | sudo tee -a $irexecshfile 1> /dev/null
+		echo '# Key codes: UP DOWN LEFT RIGHT BACK PLAYPAUSE MENU HOME OK MUTE VOLUMEUP VOLUMEDOWN' | sudo tee -a $irexecshfile 1> /dev/null
+		echo '' | sudo tee -a $irexecshfile 1> /dev/null
+
+		echo 'amixerdevice=$(/usr/bin/amixer scontrols | sed -n "s/^.*'"'\(.*\)'"'.*$/\1/p")' | sudo tee -a $irexecshfile 1> /dev/null
+		echo 'if [ $1 == "VOLUMEUP" ]' | sudo tee -a $irexecshfile 1> /dev/null
+		echo 'then' | sudo tee -a $irexecshfile 1> /dev/null
+		echo '        /usr/bin/amixer set $amixerdevice -- $[$(/usr/bin/amixer get $amixerdevice|grep -o [0-9]*%|sed '"'s/%//'"')+5]%' | sudo tee -a $irexecshfile 1> /dev/null
+		echo 'elif [ $1 == "VOLUMEDOWN" ]' | sudo tee -a $irexecshfile 1> /dev/null
+		echo 'then' | sudo tee -a $irexecshfile 1> /dev/null
+		echo '        /usr/bin/amixer set $amixerdevice -- $[$(/usr/bin/amixer get $amixerdevice|grep -o [0-9]*%|sed '"'s/%//'"')-5]%' | sudo tee -a $irexecshfile 1> /dev/null
+		echo 'elif [ $1 == "MUTE" ]' | sudo tee -a $irexecshfile 1> /dev/null
+		echo 'then' | sudo tee -a $irexecshfile 1> /dev/null
+		echo '        /usr/bin/amixer set $amixerdevice toggle' | sudo tee -a $irexecshfile 1> /dev/null
+		echo 'fi' | sudo tee -a $irexecshfile 1> /dev/null
+
+		echo '' | sudo tee -a $irexecshfile 1> /dev/null
+
+		sudo chmod 755 $irexecshfile
+	fi	
+fi
+
+if [ ! -f "$irdecodefile" ]
+then
+	sudo wget https://download.argon40.com/argonone-irdecoder.py -O $irdecodefile --quiet
+fi
+
+sudo python3 $irdecodefile $remotemode
+
+if [ ! -d $kodiuserdatafolder ]
+then
+	if [ ! -d "$HOME/.kodi" ]
+	then
+		mkdir "$HOME/.kodi"
+	fi
+	mkdir $kodiuserdatafolder
+fi
+
+if [ -d $kodiuserdatafolder ]
+then
+	echo "<lircmap>" | tee $kodilircmapfile 1> /dev/null
+	echo '    <remote device="argon">' | tee -a $kodilircmapfile 1> /dev/null
+	echo '        <left>KEY_LEFT</left>' | tee -a $kodilircmapfile 1> /dev/null
+	echo '        <right>KEY_RIGHT</right>' | tee -a $kodilircmapfile 1> /dev/null
+	echo '        <up>KEY_UP</up>' | tee -a $kodilircmapfile 1> /dev/null
+	echo '        <down>KEY_DOWN</down>' | tee -a $kodilircmapfile 1> /dev/null
+	echo '        <select>KEY_OK</select>' | tee -a $kodilircmapfile 1> /dev/null
+	echo '        <start>KEY_HOME</start>' | tee -a $kodilircmapfile 1> /dev/null
+	echo '        <rootmenu>KEY_MENUBACK</rootmenu>' | tee -a $kodilircmapfile 1> /dev/null
+	echo '        <volumeplus>KEY_VOLUMEUP</volumeplus>' | tee -a $kodilircmapfile 1> /dev/null
+	echo '        <volumeminus>KEY_VOLUMEDOWN</volumeminus>' | tee -a $kodilircmapfile 1> /dev/null
+	echo '    </remote>' | tee -a $kodilircmapfile 1> /dev/null
+	echo '</lircmap>' | tee -a $kodilircmapfile 1> /dev/null
+fi
+
+echo
+echo "Thank you."
+if [ $needrestart -eq 1 ]
+then
+	echo "Changes should take after reboot."
+elif [ $needinstallation -eq 1 ]
+then
+	sudo systemctl restart lircd.service
+	sudo systemctl restart irexec.service
+fi